AW26 development open · Sampling slots from March
← Journal
Development notes · 8 December 2025 · 6 min read

Taped seams: when a jacket really is waterproof

A 20,000 mm membrane means little if the stitch holes are open. Here is what we check before calling a shell waterproof.

Taped seams: when a jacket really is waterproof

Waterproofness is a system, not a number on a spec sheet. The membrane can be excellent and the garment will still leak at every needle hole unless the seams are taped.

Three things we inspect

  • Tape alignment along the seam — a tape that drifts by two millimetres leaves a line of exposed stitching.
  • Corner turns at the hood and underarm, where most tapes fail first.
  • Zip laminates and storm flaps, which are only as good as the bond behind them.

We run a water test on the finished sample, not just on the fabric roll. It is a slower way to work, and it is the only one that tells the truth.

Developing a style?

Send the reference and the end use. We will come back with a development plan and an FOB quote.

Enquire about a style